Tag Archives: writing

A Late Tribute to An Early Mentor

Paul Moss was a cousin, but throughout our growing up years he was more like a brother. He lived in the country; my family had moved to town. I managed to spend as much time in the country as I could, either at my grandparents house or at Paul’s house. We did typical country boy activities together: rode horses, hunted and rambled, which was what our parents called the time we spent exploring all the forest and fields thereabout. Guns were always involved, but Paul somehow had knowledge about them that was far deeper than mine. For example, we hunted squirrels, quail, dove, rabbits and deer. While my hunting shotgun was the Model 12 Winchester that had been my father’s, Paul owned a Franchi automatic. I used slugs in my shotgun to hunt deer, but Paul had a Winchester 94 lever action rifle.

He taught me to reload shotgun shells, which I did briefly somewhere around the 5th or 6th grades. The reading material in the Moss’s family bathroom was the Shooter’s Bible. When I was reading Hot Rod and Car Craft Magazines Paul must have been reading gun magazines.

When we rambled I mostly carried my dad’s Model 10 S&W .38 Special revolver, but Paul managed to acquire a Ruger Blackhawk in .41 Magnum after one particular successful cotton harvest. I wasn’t with him the day he a took a whitetail buck with that Ruger. He was going through a barbed wire fence with his rifle on the ground for safety when he heard rustling in a nearby bush. A startled buck ran out of the brush. As he ran away, Paul pulled the .41 from its holster and shot the buck in the back of the head.

Paul was drafted after high school. In Vietnam he was assigned as a door gunner on a C Model Huey gunship. He wrote me one letter in which he told me if I came to Vietnam, I should do it as a Warrant Officer aviator flying helicopters. That’s exactly what happened. What’s interesting about that is when we were young boys, we flew my dad’s Chevy station wagon on many make-believe missions. In those sessions I was always the pilot, sitting on the driver’s side, while Paul sat near the other door as the crewman, who frequently manned imaginary guns, rockets or bombs.

Life took us in different directions and I’m the one who actually wound up in the gun business and for a season a gun store owner. Paul was a policeman for a while and later a fireman, but much of his life was spent managing farms for absentee owners. We both did a season in the horse business. He bought and sold them while I trained show horses. Paul’s knowledge of cattle breeds and hay varieties was impressive. When Paul was alive I used to call him when one of my grandsons and I came across questions about cattle we saw when driving back from one of our trips to or from a country gun range we frequent.

Paul died quietly in his sleep four years ago. I’m glad for him he’s in heaven (no question about it), but sort of mad at him for not letting me know he was going so I could say a proper goodbye. He went the way most of us would like to go, quietly in his sleep. Thank you Paul for teaching me to enjoy the outdoors and for making gun carrying safe and normal.

Review of the GForce Exodus

GForce Arms located in Reno, Nevada, imports twenty-seven (27) models of shotguns, six (6) handguns and three (3) rifles, all made in Turkey. A couple of the handguns are of particular interest here. After being introduced to the product line, I selected these two pistols for review. Both are 9mm. One is a mid-size handgun, the other a 1911. In this article I’ll review the Exodus RPX9, which is a Glock clone.

The GForce Arms Exodus RPX9 pistol is essentially a Glock 19 clone

Although it is functionally the same as the Glock and is compatible with any add-ons or accessories for the Glock 19, the Exodus has some design features that set it apart. Yet is sells for $300. The RPX9 is chambered for 9mm. It comes with two 15-round (or 10-round) magazines. Empty weight is 1.33 lbs. Length of the RPX9 is 7.3 inches, height is 5.25 inches and the width is 1.5 inches—Glock 19 size almost exactly.

GForce Exodus RPX9 Bronze

The RPX9 consists of an ergonomic polymer frame utilizing one of six color schemes topped with a 4140 steel slide. The slide on this one is finished in Bronze Tactical. Other colors are USA Flag, Tactical Gray, FDE, Bronze and Blue. The Exodus has both front and rear cocking serrations. The top of the slide is open. The slide is cut for a SHIELD RMSC. The slide lock is similar in size to the one on the Glock but with a bump that makes it easy to access.

Equipped with Glock Fiber Optic sights, the RPX9 facilitates rapid target acquisition and enhanced accuracy in various lighting conditions. Its compatibility with both GEN 3 & 4 Glock 19 parts and magazines offers versatility and convenience, allowing users to personalize their firearm to suit their preferences. For safety, the RPX9 incorporates multiple layers of protection including a loaded chamber indicator, trigger safety and firing pin safety.

The Exodus is compatible with the G3 or G4 Glock.

The trigger on my example was a little rough and initially measured a bit over 8 lbs. I subjected the gun to 115 grain, 124 grain and 147 grain practice ammo plus three or four different types of defensive ammo and experienced no ammo failures of any kind. The sights are larger than the sights on my Glock, and they made it easy to put solid groups on target. All in all I figured this for a good carry gun if it just had a decent trigger. Fortunately, I knew of a solution made of aftermarket parts for a Glock 19. If it works on the Glock, it’s supposed to work here. The parts are inexpensive and drop-in so I decided to try them.

Apex Action Enhancement Trigger

First, I added an Apex Action Enhancement Trigger, cost about $90. That resulted in a smooth trigger, but with a pull of over six pounds. I knew of another product that could reduce that. A company called M*CARBO makes reduced power spring kits for all kinds of firearms including the Glock 19.

M*CARBO Spring Kit for Glocks

The spring kit had the choice of 4, 5 or 6 lb. springs. I went with the 4 lb. spring and couldn’t be more pleased. I’m not sure how the spring tension works out because putting the 4 lb. spring in the gun resulted in a pistol with just under 3 lb. trigger pull. Because there were extra springs in the kit, I put the 5 lb. spring in my Glock 19 and it now has an under 4 lb. trigger pull.

I’m very pleased with the Exodus and currently have it as my daily carry gun. I may put a Riton or SwampFox red dot sight on it but the fiber optic sights on the gun are pretty nice as they are.